During the using process, if the worker operates and maintains the crusher according to correct standards, it will have great significance in normal production, output, quality, service life, working efficiency and the prevention of accidents, etc.
At present, the common cone crushers are mainly the single toggle cone crusher and compound cone crusher (Symons cone crusher). Although both types of cone crushers are totally different, they have the same operation procedure.
The operation procedure of cone crusher can be divided into four stages: before the start, at start-up, at run time and turning-off time. All conditions should be paid attention in each stage, and the potential problems can be found and solved timely and the service time can be prolonged.
Turn on the lubricating oil pump to run for three to five minutes. After everything runs well, turn on the crusher as required. After the crusher idles for one to two minutes, confirm that all things are well, and feed the rocks or stones.
During the crushing process, there is a great impact on the concave which makes the filled zinc layer be out of shape. Therefore, the U-type bolt should be tightened frequently to make the concave fix and avoid concave from deformation.
The mantle is fixed by the upper bolt of the main shaft. The looseness of the bolt can make the mantle unstable, even the filled layer may fall off to cause downtime. Hence, the bolts should be often checked and fixed to avoid looseness.
The spherical bearing should be installed in the borehole of crusher closely. After a long period of working, the tightness of crusher' parts can be broken. The tightness of spherical bearing must be checked frequently, and the oil gallery of the spherical bearing should be kept clean.
Water seal is the equipment for preventing crusher from dust, which is very important to the normal operation of cone crusher. Therefore, daily maintenance and checking its integrality are very necessary.
Through the study of this article, you must have a deeper understanding of the operation and maintenance of the cone crusher. In the case of the above-mentioned failure of the crusher, the problem is analyzed and solved by referring to the method given in this article.