The series of jaw crushers produced by Rayco are widely used in mining and aggregate crushing industries. They are specially developed for crushing the hardest ores and rocks, and are mainly used as primary crushers.
When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the toggle plate and the movable jaw becomes larger, thereby pushing the movable jaw plate closer to the fixed jaw plate, and the material passes through the two jaws. The squeezing and rolling between the plates realize multiple crushing.
When the movable jaw descends, the angle between the toggle plate and the movable jaw becomes smaller. The movable jaw plate leaves the fixed jaw plate under the action of the pull rod and the spring, and the crushed material passes through the discharge port in the lower jaw cavity freely under the action of gravity Unload.
When crushing high hardness and strong corrosive materials, C6X can accomplish the task very well. Its equipment structure, manufacturing technology and material selection determine the high strength of its body. Not only can it be used for coarse crushing of the hardest rocks and ore, but also can be continuously produced in the most demanding production environment on the ground and underground to ensure the maximum production efficiency of customers.