Get a Quote

planning a maintenance schedule for a crusher plant

shut down management - plant maintenance

shut down management - plant maintenance

> Easily Prepare Daily Maintenance Plan with an Advanced USERFORM, with few Clicks! >Add Task to Daily Plan with few clicks 1.Select a Manpower 2.Select a WO from the list in Userform Or manually enter the description of WO and choose Estimated Hours 3.Click "ADD Task" Button >Cells are merged and colored automatically

>Compare Maintenance Plan versus Actual by visiting job site >Use SIC checklist to check each Work Order in Daily Maintenance Plan for; -Safety Issues -Preparation Steps -Maintenance Execution Quality -After Job Completion Steps >Enter SIC Data by a Userform

>Easily assign required spare parts to the Work Orders, with an Advanced Userform; 1.Select Work Order to add/plan spare part 2.1.Select required spare parts from the BOM list for equipment for selected WO 2.2.OR Select required spare parts from from the Main Part List dropdown menu >Easily send "Required Spare Part Lists" by email to related people

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

cone crusher maintenance - 911 metallurgist

cone crusher maintenance - 911 metallurgist

A wobble plate feeder is furnished as standard equipment with Fine crushing chambers and as optional equipment with Coarse and Intermediate crushing chambers. It consists of a distributing plate to which a wobbling motion is imparted by the gyrating motion of the main shaft. The feeder is equipped with an enclosing hopper and an adjustable feed pipe for varying the quantity of feed.

Adjustment for product size and wear is accomplished in a cylinder cast integral with the bottom plate. This cylinder is fitted with a bushing, and the cylinder and piston, sealed at the bottom with an oil-proof packing, form a hydraulic jack which supports the main shaft assembly. Oil is pumped into or out of the cylinder below the piston by means of a hand pump in crusher sizes up to and including 48-in. The larger Hydrocone crushers are equipped with a motor-driven pump operated by push-button control to speed up adjustment.

The Automatic Reset consists of an accumulator charged to a predetermined pressure and connected by flexible hose to the hydraulic jack under the mainshaft assembly. Any uncrushable material entering the crushing chamber causes an increase in the crushing pressure and forces oil from the hydraulic jack to the accumulator. This causes the head to lower sufficiently to pass the uncrushable material. When the crushing pressure returns to normal, the pressure in the accumulator resets the crushing head to its original position. The Automatic Reset functions separately from the Speed-Set control. Its operation is entirely automatic.

Only non-explosive gases, such as nitrogen, should be used for filling the Automatic Reset. Explosive gases such as oxygen or hydrogen must not be used. Suitable gas in tanks can be obtained from a number of companies having offices in most large U. S. cities and throughout the world.

Related News
Contact Us

Do you need to know the product price? model? Configuration scheme? Output? Please leave your correct message and we will reply you within 24 hours.

I accept the Data Protection Declaration