Thanks to our broad solution selection and abundant encounters in this market, our merchandise are promoting effectively in the American, European, South American and Asian marketplaces. If you need any information or samples, remember to contact us and you will have our shortly reply. ONE:ApplicationXCRS Drum Soaked weak magnetic separator is mostly utilised in metallic benefication laboratory. It employs soaked approach for magnetic separation of wonderful-grained strong magnetic ores in the type of pXiHu (West EPT) Dis.Hu (West EPT) Dis.lel flow. XCRS Drum Moist weak magnetic separator is small in dimension, ligEPTT in excess weight, straightforward in procedure and handy in servicing. The equipment is not ideal for benefication checks with corrosive liquids.
Structural Introduction and QualitiesXCRS Drum Wet weak magnetic separator is composed of the main body of the magnetic separator and drum EPTT source. The main human body of magnetic separator largely incEPTTs: one: Body 2: magnetic drum 3: ore trough(hopper) four: spray pipe five: EPTT device six: feeding ore box.
2. EPTic drum: It is equipped with four excitation coils and magnet cores, and an additional magnetic pole with out excitation coil is set up on its discharging aspect to faXiHu (West EPT) Dis.Hu (West EPT) Dis.tate ore unloading. These five poles form supporter-formed mounted on the mandrel, the mandrel is fastened on the body via bearing bushes, and the cylinEPTTis produced of non-magnetic content EPT and stainless metal, and the enthusiast-formed coil is manufactured of non-magnetic materials. The relationship results in the alternation of the magnetic area polarity on the palm of every single magnetic pole and the flip of ore particles up to 180 degrees for each passing magnetic pole. UnEPTTthe motion of magnetic stirring, the quality of magnetic products can be enhanced. At one end of the mandrel, a square outward composition can be employed to rotate the magnetic poles in the drum around the aXiHu (West EPT) Dis.s, so as to meet the needs of different EPTrals.
3.EPTT gadget: Installed on the base facet of the body, in orEPTTto decrease the cEPTTr of gravity of the EPTT EPTT, the EPTT portion is composed of a few AC motors, worm EPTs and worm EPTTes.The output of the EPTT is EPTn to the drum via the EPT, which EPTs the drum to rotate (the magnetic pole does not rotate with it). The speed of the drum is twenty five rpm. The course of rotating pressure of magnetic drum is constant with that of ore feeding.
It is welded by aluminium and stainless metal plate and fastened on the frame by screw. An overflow outlet is organized at the feeding facet of the ore trough to preserve the liquid degree large, and a focus nozzle is arranged at the decrease element of the concentrate trough for receiving ore.
We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.