The shaking table is a gravity beneficiation equipment for selecting fine materials, such as the tin, tungsten, gold and silver, lead, zinc, antimony, bismuth, iron, manganese, ferrotitanium and coal, etc.
The shaking table is a gravity beneficiation equipment for selecting fine materials. When the gold shaking table in action, the effective particle size range of metal ore is 3~O. 019 mm. While it processes the coal, the upper limit granularity is 10mm. The outstanding advantage of the shaker is that the sorting precision is high, and high-grade concentrate or waste tailings can be obtained by one sorting, and multiple products can be taken out at the same time. Besides, the shaking table is easy to adjust.
Mining gold shaking table is a common mineral processing equipment for sorting fine ore. When the metal ore is processed, the effective particle size range is 3~O. 019 mm, the upper limit particle size can be up to 10 mm when coal is selected. The outstanding advantage of 6-S shaker is the high precision of sorting. High-grade concentrate or waste tailings can be obtained by one selection, and multiple products can be taken at the same time. The flat 6-S shaker is easy to handle and easy to adjust. The main disadvantage is that the equipment covers a large area and the processing capacity per unit of the factory area is low.
Shaking table is widely used in many industries, and can be used for rough selection and sweeping of materials. Its main materials are various metals and heavy metal materials such as gold, silver, zinc, tungsten, iron, manganese, lead, coal, etc. The size of coarse sand is 2-0.5mm, and the fine sand is 0.5-0.074mm. The effective recycling range of shaking table is 2-0.22mm when processing the tungsten, tin and other metal ore materials.
The gold shaking table is made up of table surface, main frame, transmission device and motor. Moreover, the gold shaking table will be armed with the water filling chute, feeding chute and engine base.
The motor of the shaking table drives the crankshaft to rotate the rocker through the belt and then moves up and down. When the rocker moves downward, the mineral material enters through the mining channel on the inclined surface. Shaker sink provides lateral impact water.
The material with different specific gravity, particle size, and density flushed with rinsing and will be selected and output from the concentrate mouth of shaking table, and the tailings mouth. Thus, the processed ore is the high-quality concentrate. However, because of the replacement of mining gold shaking table, FTM Machinery, as the gold shaking table supplier, had improved a lot in term of its throughput and accuracy.
4.After checking the installation connections, the empty shaking table runs for 1-2 hours to check whether the bed surface is running smoothly, whether the connection is loose, shaking or sliding, whether the lubrication is good, and 2whether the lateral slope adjustment is flexible and stable.
6.If there is no problem with empty shaking table, you can put the ore there. according to the ore transportation and zoning on the shanking table surface, adjusting the ore concentration and concentration, stroke, cross slope and flushing water volume, etc.